New NCR N3000 Site Controller Replacement SSD, 60GB 006-8627916 A13.175HGD.002N3

Apacer’s ST170-25 is a well-balanced solid-state disk (SSD) drive with standard form factor and great

performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write

speed, making it the ideal companion for heavy-loading industrial or server operations.

ST170-25 utilizes 3D NAND for higher capacity up to 960GB and provides more power efficiency than

2D NAND. Regarding reliability, ST170-25 is implemented with LDPC (Low Density Parity Check)

ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a

flash chip. In addition, the drive comes with various implementations including powerful hardware

ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, and

power failure management.

Specifications Overview:

 Compliance with SATA Revision 3.2

– SATA 6.0 Gbps interface

– Backward compatible with SATA 1.5 and 3.0

Gbps interfaces

– ATA-8 command set

 Capacity

– 30, 60, 120, 240, 480, 960 GB

 Performance*

– Burst read/write: 600 MB/sec

– Sequential read: Up to 515 MB/sec

– Sequential write: Up to 485 MB/sec

– Seq. read QD32: Up to 560 MB/sec

– Seq. write QD32: Up to 510 MB/sec

– Random read (4K): Up to 84,000 IOPS

– Random write (4K): Up to 85,000 IOPS

 Flash Management

– Low-Density Parity-Check (LDPC) Code

– Global Wear Leveling

– Flash bad-block management

– Flash Translation Layer: Page Mapping

– S.M.A.R.T.

– Power Failure Management

– Device Sleep

– ATA Secure Erase

– TRIM

– Hyper Cache Technology

– Over-Provisioning

 Endurance (in drive writes per day: DWPD)

– 30 GB: 2.4 DWPD

– 60 GB: 2.4 DWPD

– 120 GB: 2.4 DWPD

– 240 GB: 2.4 DWPD

– 480 GB: 3.0 DWPD

– 960 GB: 3.6 DWPD

 Temperature Range

– Operating: 0°C to 70°C

– Storage: -40°C to 100°C

 Supply Voltage

– 5.0 V ± 5%

 Power Consumption*

– Active mode: 355 mA

– Idle mode: 75 mA

 Connector Type

– 7-pin SATA signal connector

– 15-pin SATA power connector

 Form Factor

– 2.5”

– Dimensions: 100.00 x 69.85 x 6.90,

unit: mm

– Net Weight: 44.56 g

 Shock & Vibration**

– Shock: 1,500 G

– Vibration: 15 G

 NAND Flash Type: 3D TLC (BiCS3)

 MTBF: >1,000,000 hours

 SATA Power Management Modes

 Reliability

– Thermal Sensor

 Security

– End-to-End Data Protection

 RoHS Compliant