New NCR N3000 Site Controller Replacement SSD, 60GB 006-8627916 A13.175HGD.002N3
30-day warranty.
SPECS ON DRIVE ITSELF :
Apacer’s ST170-25 is a well-balanced solid-state disk (SSD) drive with standard form factor and great
performance. Designed in SATA 6.0 Gbps interface, the SSD is able to deliver exceptional read/write
speed, making it the ideal companion for heavy-loading industrial or server operations.
ST170-25 utilizes 3D NAND for higher capacity up to 960GB and provides more power efficiency than
2D NAND. Regarding reliability, ST170-25 is implemented with LDPC (Low Density Parity Check)
ECC engine to extend SSD endurance and increase data reliability while reading raw data inside a
flash chip. In addition, the drive comes with various implementations including powerful hardware
ECC engine, power saving modes, wear leveling, flash block management, S.M.A.R.T., TRIM, and
power failure management.
Specifications Overview:
Compliance with SATA Revision 3.2
– SATA 6.0 Gbps interface
– Backward compatible with SATA 1.5 and 3.0
Gbps interfaces
– ATA-8 command set
Capacity
– 30, 60, 120, 240, 480, 960 GB
Performance*
– Burst read/write: 600 MB/sec
– Sequential read: Up to 515 MB/sec
– Sequential write: Up to 485 MB/sec
– Seq. read QD32: Up to 560 MB/sec
– Seq. write QD32: Up to 510 MB/sec
– Random read (4K): Up to 84,000 IOPS
– Random write (4K): Up to 85,000 IOPS
Flash Management
– Low-Density Parity-Check (LDPC) Code
– Global Wear Leveling
– Flash bad-block management
– Flash Translation Layer: Page Mapping
– S.M.A.R.T.
– Power Failure Management
– Device Sleep
– ATA Secure Erase
– TRIM
– Hyper Cache Technology
– Over-Provisioning
Endurance (in drive writes per day: DWPD)
– 30 GB: 2.4 DWPD
– 60 GB: 2.4 DWPD
– 120 GB: 2.4 DWPD
– 240 GB: 2.4 DWPD
– 480 GB: 3.0 DWPD
– 960 GB: 3.6 DWPD
Temperature Range
– Operating: 0°C to 70°C
– Storage: -40°C to 100°C
Supply Voltage
– 5.0 V ± 5%
Power Consumption*
– Active mode: 355 mA
– Idle mode: 75 mA
Connector Type
– 7-pin SATA signal connector
– 15-pin SATA power connector
Form Factor
– 2.5”
– Dimensions: 100.00 x 69.85 x 6.90,
unit: mm
– Net Weight: 44.56 g
Shock & Vibration**
– Shock: 1,500 G
– Vibration: 15 G
NAND Flash Type: 3D TLC (BiCS3)
MTBF: >1,000,000 hours
SATA Power Management Modes
Reliability
– Thermal Sensor
Security
– End-to-End Data Protection
RoHS Compliant