For NCR N3000 System.
Specifications Overview:
- Compliance with SATA Revision 3.2
– SATA 6.0 Gbps interface
– Backward compatible with SATA 1.5 and 3.0
Gbps interfaces
– ATA-8 command set
Capacity
– 30, 60, 120, 240, 480, 960 GB
Performance*
– Burst read/write: 600 MB/sec
– Sequential read: Up to 515 MB/sec
– Sequential write: Up to 485 MB/sec
– Seq. read QD32: Up to 560 MB/sec
– Seq. write QD32: Up to 510 MB/sec
– Random read (4K): Up to 84,000 IOPS
– Random write (4K): Up to 85,000 IOPS
Flash Management
– Low-Density Parity-Check (LDPC) Code
– Global Wear Leveling
– Flash bad-block management
– Flash Translation Layer: Page Mapping
– S.M.A.R.T.
– Power Failure Management
– Device Sleep
– ATA Secure Erase
– TRIM
– Hyper Cache Technology
– Over-Provisioning
Endurance (in drive writes per day: DWPD)
– 30 GB: 2.4 DWPD
– 60 GB: 2.4 DWPD
– 120 GB: 2.4 DWPD
– 240 GB: 2.4 DWPD
– 480 GB: 3.0 DWPD
– 960 GB: 3.6 DWPD
Temperature Range
– Operating: 0°C to 70°C
– Storage: -40°C to 100°C
Supply Voltage
– 5.0 V ± 5%
Power Consumption*
– Active mode: 355 mA
– Idle mode: 75 mA
Connector Type
– 7-pin SATA signal connector
– 15-pin SATA power connector
Form Factor
– 2.5”
– Dimensions: 100.00 x 69.85 x 6.90,
unit: mm
– Net Weight: 44.56 g
Shock & Vibration**
– Shock: 1,500 G
– Vibration: 15 G
NAND Flash Type: 3D TLC (BiCS3)
MTBF: >1,000,000 hours
SATA Power Management Modes
Reliability
– Thermal Sensor
Security
– End-to-End Data Protection
RoHS Compliant